---
title: "$10 Smartwatch: DIY Enthusiast Builds Steampunk Gadget Based on ESP32-C3"
description: "Enthusiast Huy Vector DIY built an ESP32-C3 Super Mini-based smartwatch with an OLED screen and Bluetooth for under $10. All schematics, firmware, and instructions are openly available."
date: 2026-11-15T14:36:45.854Z
lang: en
url: https://xab.info/en/posts/10-dollar-esp32-smartwatch-diy
tags: [diy-electronics, esp32, smartwatch, oled-display, open-source, steampunk, bluetooth, maker-project]
author: "Roman V."
publisher: "XAB.info"
---

# $10 Smartwatch: DIY Enthusiast Builds Steampunk Gadget Based on ESP32-C3

![DIY smartwatch based on ESP32-C3 with OLED screen on an enthusiast's wrist](https://xab.info/media/2026/11/15/umnye-chasy-esp32-za-10-dollarov-diy/umnye-chasy-esp32-za-10-dollarov-diy-1.webp)

## Key Points

- The cost of electronic components for the DIY smartwatch is under 10 dollars
- The device is based on an ESP32-C3 Super Mini development board, a 1.3-inch OLED display, and a 3.7V battery
- The free NWatch firmware provides Bluetooth connectivity, time synchronization, and notification display
- A brass tube case gives a steampunk look but does not provide full water resistance
- All schematics, firmware, and instructions have been published openly by the author

In November 2026, a project emerged online that caught the attention of the DIY electronics community: an enthusiast known as Huy Vector DIY independently built a functional smartwatch with electronic components costing no more than $10. While the device's capabilities are comparable to ready-made fitness trackers, its key distinction is the complete transparency of its design and the ability to modify it independently. The author published all project details in the public domain, including a parts list with supplier links, wiring diagrams, and software.

### The Hardware Core: Development Board Instead of a Factory Module

At the heart of the watch is a compact ESP32-C3 Super Mini development board—one of the most affordable modules based on the Espressif chipset, widely used in prototyping and IoT projects. Connected to the board are a 1.3-inch OLED display, a three-position control button, and a 3.7V lithium-ion battery. Charging is handled directly via a USB-C port integrated onto the board itself, eliminating the need for a separate charge controller. A photo of the device reveals a blue printed circuit board with pin labels (VDD, GND, SCK, SDA) at the top of the case, alongside an OLED matrix displaying a watch face selection menu with RAIN, MATRIX, CLOCK, BIGTIME, and CUBE options.

### NWatch Firmware: Bluetooth, Notifications, and Watch Faces

The watch is powered by the free NWatch firmware, which provides Bluetooth connectivity to a smartphone. The device synchronizes time, displays incoming notifications and calls, and offers several watch face styles ranging from classic analog hands to minimalist digital layouts. On-screen in the photo, a stylized peace sign watch face with 12, 3, 6, and 9 o'clock markers highlights the interface customization available to the user without relying on third-party services.

### A Brass Case with a Steampunk Vibe

The watch frame is constructed from a brass tube, giving the device a distinct steampunk aesthetic: the open design lets you see the circuit board, wires, and mounting elements. This aesthetic was deliberately chosen by the author as part of the concept—the watch looks less like a mass-market gadget and more like a handcrafted artifact. However, the open architecture does not provide full water resistance; the case lacks hermetic sealing, and water ingress could damage the components. Nevertheless, during testing, the device survived a short immersion in a glass of water, which Notebookcheck attributes to a water-repellent coating on the board.

### Who Is This Project For and What Do You Need?

Replicating this build is not for everyone: the project requires solid soldering skills, an understanding of ESP32 family boards, and basic electronics knowledge. There is no ready-made out-of-the-box solution here—the user assembles the device from individual components, solders the display, button, and battery, and then flashes the board. In return, the enthusiast gains complete freedom: the ability to change firmware, add custom features, and experiment with the interface and hardware. For those already working with Arduino and ESP platforms, the project offers a compact and inexpensive way to get a personal smartwatch without overpaying for a brand and marketing markup.

### Open Access and Project Context

Author Huy Vector DIY has released all materials—from the BOM list and 3D housing drawings to the source code of the firmware—in open access, allowing anyone to replicate the device. The project was initially covered by Notebookcheck and subsequently picked up by tech portals. At a time when mainstream smartwatches start at $30–50 and fitness bands at $15–20, a $10 solution remains niche, but it demonstrates that core smartwatch features—time, notifications, Bluetooth synchronization—can be achieved on a minimal budget with tools and patience.

## Fact-Check & Sources

- [Энтузиаст собрал умные часы с OLED-экраном за 10 долларов](https://www.ixbt.com/news/2026/11/15/entuziast-sobral-umnye-casy-s-oled-ekranom-za-10-dollarov.html) - Confirmed: cost under $10, ESP32-C3 Super Mini, 1.3" OLED, button, 3.7V battery, USB-C, NWatch firmware, Bluetooth, brass case, water glass test, soldering skill requirements, open-access materials.
- [Умные часы с OLED-экраном собрали менее чем за $10](https://itzine.ru/news/gadgets/umnye-chasy-s-oled-ekranom-sobrali-menee-chem-za-10-dollarov.html) - All facts from source 1 confirmed. Additionally noted: author's name Huy Vector DIY, original source Notebookcheck, water-repellent coating as the reason for surviving the water test.

## FAQ

### How much do the components for building such a smartwatch cost?

According to the sources, the total cost of all electronic components is less than 10 dollars. The project author published a complete parts list with supplier links.

### What board is used as the core?

The device is based on a compact ESP32-C3 Super Mini development board, connected to a 1.3-inch OLED display, a three-position button, and a 3.7V battery.

### What functions does the watch support?

The watch connects to a smartphone via Bluetooth, synchronizes time, and displays incoming notifications and calls. The NWatch firmware includes several watch face design options.

### How water-resistant is the device?

The open design does not provide full water resistance. However, during testing, the watch survived a brief immersion in a glass of water, which Notebookcheck attributes to a water-repellent coating on the board.

### Who is this project for?

The build requires soldering skills and experience with ESP32 boards. The project is aimed at enthusiasts who want to create and modify their own smartwatches at minimal cost.