--- title: "iFixit tears down 14-inch MacBook Pro with PROLED XDR touch screen: 5 out of 10 and glowing logo design" description: "iFixit technicians have disassembled the 14-inch MacBook Pro with a PROLED XDR touch screen and given it a 5 out of 10 repairability score. The screen can only be replaced with the lid, and the battery is glued in again." date: 2026-11-11T11:40:39.584Z lang: en url: https://xab.info/en/posts/ifixit-teardown-macbook-pro-proled-xdr tags: [apple, macbook-pro, ifixit, oled, repairability] author: "Alexander Buran" publisher: "XAB.info" --- # iFixit tears down 14-inch MacBook Pro with PROLED XDR touch screen: 5 out of 10 and glowing logo design ![Technician holding a removed battery and disassembled lid of an Apple MacBook Pro laptop](https://xab.info/media/2026/11/11/ifixit-razborka-macbook-pro-proled-xdr/ifixit-razborka-macbook-pro-proled-xdr-1.webp) ## Key Points - iFixit rated the repairability of the 14-inch MacBook Pro with PROLED XDR at 5 out of 10 — one point higher than last year's M5 model. - The touch dual-layer OLED screen (120 Hz, 2000 nits) can only be replaced with the lid; technicians damaged the OLED layer and touch surface when removing the glass. - The glowing logo works via four LEDs, a reflective layer, and a diffuser, rather than the screen backlight. - Parts recognition has improved: a system with a foreign board recognized the battery, screen, and Touch ID without extra setup; however, the battery is glued in again, and memory and storage are non-replaceable. iFixit technicians have completed the teardown of the 14-inch Apple MacBook Pro with a PROLED XDR touch screen and rated its repairability at 5 out of 10. The design, as is customary for the manufacturer, proved challenging, yet the new model received one point more than last year's M5-chip version. The main innovation is the touch display based on a dual-layer OLED matrix with a 120 Hz refresh rate and a peak brightness of 2000 nits, while the glowing logo has returned to the laptop lid. The total weight of the computer is approximately 1.38 kg. ### PROLED XDR Touch Screen: What the Microscope Showed The teardown confirmed that the screen can still only be replaced along with the lid: separating the panel without damage is virtually impossible. Even iFixit technicians damaged the OLED layer and touch surface when attempting to remove the glass. Examining the dual-layer OLED panel under a microscope, specialists found that the blue pixels are noticeably larger than the red and green ones. According to their assessment, this is because blue elements wear out faster: the increased area distributes the load over a larger section of material, reduces operating intensity, and increases durability. ### Glowing Apple: How the Logo Backlight Works The logo backlight is no longer connected to the screen, unlike older MacBooks where the apple was illuminated by the LED display's backlight. In the new model, four LEDs direct light onto a reflective layer, after which it passes through a diffuser and evenly illuminates the Apple emblem. At the same time, repairing the backlight again requires complex disassembly of the lid, so experts advise against counting on a simple replacement of individual elements. ### Repairability: 5 out of 10 and What Improved During the component replacement check, an important improvement was recorded: after installing a logic board from another unit, the system recognized the battery, screen, and Touch ID sensor. Without additional configuration, the touch screen, brightness control, and True Tone technology started working, and the fingerprint scanner was successfully configured. Thus, Apple has improved the lid design and enhanced the software for part recognition. ### Weight Reduction and Remaining Limitations Apple reduced the weight primarily through the chassis and lid: the bottom case became 92 g lighter, and the screen assembly 101 g lighter. The 72.6 Wh battery remained virtually unchanged with a weight of 276 g; it is glued in again, and extracting it without damage is not easy. Cooling fans and USB Type-C ports are located under the printed circuit board, so replacing them requires its disassembly. The HDMI port and SD card reader are soldered to the board, RAM and storage cannot be replaced, and the keyboard, built into the upper case, complicates DIY replacement — unlike the affordable MacBook Neo, where it was possible. The final 5 out of 10 score reflects a balance: an improved lid and parts-recognition software versus difficult access to fans and ports, soldered components, and laborious battery replacement. ## Fact-Check & Sources - [Разборка нового MacBook Pro OLED показала устройство светящегося яблока и другие особенности](https://3dnews.ru/1151148) - Primary source: iFixit teardown of the 14-inch MacBook Pro with PROLED XDR, 5/10 rating, screen design, logo, weight, and components. All figures (120 Hz, 2000 nits, 1.38 kg, 92 g, 101 g, 72.6 Wh, 276 g) are taken from the source text. ## FAQ ### What repairability score did the new MacBook Pro receive? iFixit gave the 14-inch MacBook Pro with a PROLED XDR touch screen 5 out of 10 — one point higher than last year's M5-chip model. ### Can just the screen be replaced without the lid? No. The screen is replaced only together with the lid: separating the panel without damage is practically impossible, and when trying to remove the glass, iFixit technicians damaged the OLED layer and touch surface. ### How does the Apple logo backlight work? Four LEDs direct light onto a reflective layer, after which it passes through a diffuser to evenly illuminate the emblem. The backlight is not connected to the screen, unlike older MacBooks. ### What improved in component recognition? After installing a logic board from another unit, the system recognized the battery, screen, and Touch ID sensor; without extra setup, the touch screen, brightness control, and True Tone worked, and the fingerprint scanner was configured.