---
title: "Sapsan train runs 210 times at 230 km/h: Russian Railways tests future HSR line Moscow—St. Petersburg"
description: "RZD reported 210 runs of the Sapsan train at speeds up to 230 km/h on the Sablino—Tosno test section. To test the track of the future Moscow—St. Petersburg HSR, 1500 sensors were installed, collecting over 35 TB of data."
date: 2026-11-18T22:44:07.072Z
lang: en
url: https://xab.info/en/posts/sapsan-230-km-h-testing-moscow-st-petersburg-hsr
tags: [rzd, sapsan, high-speed-rail, moscow-st-petersburg, railway-testing]
author: "Alexander Buran"
publisher: "XAB.info"
---

# Sapsan train runs 210 times at 230 km/h: Russian Railways tests future HSR line Moscow—St. Petersburg

![High-speed Sapsan electric train moves along tracks near a mountainside on a sunny day](https://xab.info/media/2026/11/18/sapsan-230-km-ch-ispytaniya-vsm-moskva-sankt-peterburg/sapsan-230-km-ch-ispytaniya-vsm-moskva-sankt-peterburg-1.webp)

## Key Points

- Sapsan completed 210 runs at speeds up to 230 km/h on the Sablino — Tosno section
- 1500 sensors were installed at the test site, collecting over 35 TB of data on track behavior
- The future HSR will pass through six regions and is intended for passengers only
- During peak hours, trains will depart at 15-minute intervals
- Sapsan operational speed is up to 250 km/h, design speed up to 300–350 km/h

Russian Railways (RZD) has completed another stage of field tests for the high-speed Sapsan train on a specialized proving ground. As reported by RZD CEO Oleg Belozerov, the electric train completed 210 runs at speeds of up to 230 km/h on the Sablino — Tosno test section. The objective was to inspect the railway track design that will serve as the foundation for the future High-Speed Rail (HSR) line connecting Moscow and Saint Petersburg. Essentially, the test site is used to evaluate not the rolling stock characteristics, but rather the behavior of the track under high-speed load.

### Proving ground as a "scientific center": 1500 sensors and over 35 TB of data

To gather information on track conditions, 1500 sensors were installed at the test facility. During the 210 runs, specialists acquired over 35 terabytes of data, which will allow for a detailed assessment of how the railway bed performs at high speeds. Oleg Belozerov described the test section as "effectively a scientific center," emphasizing that this was a systematic study rather than one-off test runs. The resulting massive dataset will form the basis for the design and subsequent operation of the main line.

### Route and operation mode of the future main line

According to RZD, the future HSR will pass through six regions: Moscow, Saint Petersburg, as well as the Moscow, Leningrad, Novgorod, and Tver regions. The line is designed exclusively for passenger transport — freight traffic is not planned. During peak hours, trains are scheduled to depart at 15-minute intervals, which should ensure high capacity and reduce travel time between the two capitals.

### Sapsan's speed potential

It is worth noting that the demonstrated 230 km/h is far from the train's ultimate capabilities. The operating speed of the Sapsan is up to 250 km/h, while the design (technical) speed reaches 300–350 km/h, depending on the model and specifications. Thus, the tests at the proving ground were conducted with a significant speed margin, allowing for the collection of data on track behavior in conditions close to real operation without pushing the equipment to its absolute limits.

The outcome of this stage is a confirmed volume of measurements and practical experience of high-speed movement on a real section. According to RZD, this data will form the basis for further work on the creation of the Moscow — Saint Petersburg High-Speed Rail.

## Fact-Check & Sources

- [230 км/ч, 1500 датчиков и 35 ТБ данных: РЖД испытывают будущую скоростную магистраль](https://www.ixbt.com/news/2026/11/18/230-kmc-1500-datcikov-i-35-tb-dannyx-rzd-ispytyvaiut-budushhuiu-skorostnuiu-magistral.html) - Primary source: 210 runs, 230 km/h, Sablino—Tosno section, 1500 sensors, 35 TB of data, six regions, 15-minute interval, 250/300–350 km/h speeds. All figures in the article are taken from this source.

## FAQ

### Where were the Sapsan tests conducted?

At the Sablino — Tosno test section, where the train completed 210 runs at speeds of up to 230 km/h.

### How much data was collected during the tests?

Specialists installed 1500 sensors and obtained over 35 terabytes of data on railway track behavior.

### Which regions will the future HSR pass through?

It will pass through six regions: Moscow, St. Petersburg, and the Moscow, Leningrad, Novgorod, and Tver regions.

### What is the maximum speed of the Sapsan?

Operational speed is up to 250 km/h, and the design (technical) speed is up to 300–350 km/h depending on the modification.