Toyota Motorsport has introduced a prototype linear drive developed specifically for racing cars powered by internal combustion engines running on liquid hydrogen. The new design was demonstrated during the final round of the Japanese Super Endurance series at Fuji Speedway. Developed in collaboration with Kyoto University, the project aims to solve one of the key challenges of hydrogen powerplants — minimizing fuel evaporation inside the tank by reducing mechanical friction and simplifying the piston mechanism. Toyota Motorsport President Tomoya Takahashi confirmed the company's intention to deploy the new linear drive in the 24-hour Super Endurance race in June 2027.
Operating Principle: Magnetic Levitation Instead of Gears
The device consists of cylindrical elements and a permanent magnet rod placed inside a coil. When an electric current is applied, magnetic force suspends the rod in the air and forces it to move up and down. This movement operates the pump supplying liquid hydrogen to the engine. The design is based on a principle similar to that used in Japanese maglev (magnetic levitation) trains. Unlike a traditional piston mechanism, it requires no complex system of gears and mechanical transmissions. As a result, the drive is compact, capable of generating significant force, and generates substantially less heat during operation.
Why Heat Is the Ultimate Enemy of Liquid Hydrogen
For liquid hydrogen, heat generation is critical: warming accelerates fuel evaporation, leading to direct driving range losses. This is why Toyota is systematically working on every heat source within the powertrain. Earlier this season, the company placed a superconducting electric motor directly inside the liquid hydrogen tank, increasing usable tank capacity by roughly 40% and bringing the race car's range closer to that of gasoline vehicles. The magnetic levitation linear drive is a logical continuation of this strategy: eliminating mechanical friction reduces the thermal load on the fuel supply system.
Anti-Surge Baffles and Fighting Fuel Sloshing
A separate challenge Toyota faced was the movement of liquid hydrogen inside the tank during motion. Fuel splashes against the warmer inner walls of the reservoir, causing it to evaporate faster. To combat this effect, engineers installed special Teflon-coated anti-surge baffles inside the tank. According to the company, these reduced hydrogen losses by 3–5% and allowed the race car to complete an extra lap during the 24-hour race distance. The combination of these solutions — the superconducting engine, anti-surge baffles, and linear drive — forms Toyota's comprehensive approach to improving hydrogen powertrain efficiency.
Hydrogen as an Argument for Preserving ICEs in Motorsport
Toyota views hydrogen as a viable option for preserving internal combustion engines in motorsport amid the industry's global shift toward decarbonization. While most manufacturers are reallocating resources to electric vehicle programs, the Japanese automaker is betting on technological diversity: hydrogen ICEs preserve the character and dynamics of race cars familiar to fans while reducing the carbon footprint. The premiere of the linear drive at Fuji Speedway demonstrated that Toyota Motorsport is not limiting itself to adapting existing solutions, but is developing fundamentally new mechanical assemblies, borrowing principles from adjacent industries ranging from maglev transport to superconducting electrical engineering.
Chronology and Prospects
The linear drive prototype was publicly unveiled in November 2026 at the Super Endurance series finale. According to Toyota Motorsport management, commercial application of the device in racing is scheduled for June 2027 during the 24-hour Super Endurance race. The collaboration with Kyoto University highlights the project's academic depth: magnetic levitation and superconductivity are fields where Japanese science boasts decades of expertise. For Toyota, this is another step in building a technological ecosystem for hydrogen transport, where racing developments serve as a testing ground for solutions that may eventually transition to production vehicles.